Tag Archives: DC Power Supply

VI-HAM-EM

Posted on by
Reply

VI-HAM-EM is a universal AC input PFC front-end Harmonic Attenuator Module that has been optimized for use with Vicor’s V375 series of DC DC converters. Its length, width and height are 116.90 mm, 61.0 mm and 12.7 mm respectively. It may be used with any combination of V375 series DC DC converters which are available in Micro, Mini and Maxi packages with up to 600 Watts of output power. The combination of the high-boost VI-HAM-EM with V375 DC DC converters results in a power conversion system with twice the power density, fewer components and lower cost compared to previous HAM-based solutions. In addition, the VI-HAM-EM is fully compatible with Vicor’s VI-26x and VI-J6x series DC DC converters. This gives designers the freedom to choose from the industry’s broadest selection of DC DC converters with outputs from 2 to 95VDC, 50 – 600 Watts. The user need only provide external hold-up capacitors, a few discrete components, and a line flter (available from Vicor).

VI-J51-CW

Posted on by
Reply

VI-J51-CW is a half brick 12V 100W isolated DC/DC Converter from VI-J00 family. Its operating temperature is -25°C ~ 100°C and the mounting type is Flange. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. The VI-J00 MiniMod family embedded a different sizer in component-level DC-DC converters. This “lesser” size complement to the higher power VI-200 family offers up to 100W of isolated and controlled power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements. Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. You may buy VI-J51-CW from our website here http://www.uscomponent.com.

V24A24M400BL by USComponent.com – IGBT Distributor

Posted on by
Reply

V24A24M400BL is a DC DC converter from Vicor’s maxi family. This DC-DC converter module uses advanced power processing, control and packaging technologies to provide the performance, flexibleness, reliableness and cost efficiencies of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high effectiveness. Its main applications are industrial and process control, distributed power, medical, ATE, communications, defense and aerospace. V24A24M400BL’s input voltage: 18 V (18 V – 36 V), output Voltage: 24 V and output Power: 400 W. Its operating temperature is -55°C ~ 100°C and the mounting type is through hole. The length, width and height are 116.80 mm, 55.9 mm and 15.7 mm respectively. It’s efficiency is 88.2%. The package is Full Brick. Some of V24A24M400BL’s features: low noise zero current switching and zero voltage, single-wire paralleling, logic enable / disable, input undervoltage lockout, utput overvoltage protection etc. You may buy V24A24M400BL from our website here http://www.uscomponent.com.