V375A24C600AL3

Posted on May 5, 2020 by uscomponent

V375A24C600AL3 is an isolated DC-DC converter module from Vicor. Its ZCS / ZVS power-processing architecture enables efficient, low-noise, high-frequency operation. The main switch is common drain for improved thermal and noise management, the reset switch located within the primary control IC is common source for ease of control. The control circuitry is integrated into two (primary and secondary side) ICs. The result is a significant reduction in parts with the ensuing savings in cost and increase in reliability. This integration also provides extra room for the powertrain. Some benefits of V375A24C600AL3 are high efficiency and power density in a brick package, simplified “brick” mounting and thermal management, robust packaging with operating temperature from -55 to 100°C etc. You can buy V375A24C600AL3 from our website.

VI-LJN1- CY

Posted on April 7, 2020 by uscomponent

VI-LJN1- CY is a member of Vicor’s MegaMod and MegaMod Jr. groups of single, double and triple output DC-DC converters. It gives power system designers with cost saving, high performance, ready-for- service solutions for applications that might otherwise need a custom supply. Integrating standard VI-200 or VI-J00 Family converters in tough, case mount packages, MegaMod and MegaMod Jr’s. can be ordered with single, double or triple outputs, having a consolidated output power of up to 600W. Completely separated outputs take out efficiency penalties and output interaction issues. You may buy VI-LJN1- CY from our website here http://www.uscomponent.com/product-rfq.php.

VI-2W2-IU

Posted on February 20, 2018 by uscomponent

The VI-200 series of DC-DC converters from Vicor have set the standard for high power, low noise, reliability and ease-of-use in the component power industry. Thousands of combinations of input voltages, output voltages and power levels means not having to compromise when selecting modules for your power system. These power modules are field proven with an installed base of over 15 million units. VI-2W2-IU is a member of this family. Compact and efficient, VI-200 converters feature wide input voltage ranges, remote sense, enhanced output programmability, and low standby dissipation. Power boosters provide a simple, cost-effective solution for higher power requirements up to kilowatts. VI-2W2-IU products also offer output overvoltage protection and thermal shutdown. The electronic circuitry is a fully encapsulated for protection in harsh environments.

M-FIAM3HN1

Posted on January 31, 2018 by uscomponent

M-FIAM3HN1 is a 270v DC front-end in Filter Input Attenuator Module that provides EMI filtering and transient protection, and inrush current limiting in DC-DC applications. Its Output Current is Up to 25A. The FIAM family from Vicor enables designer using Vicor Maxi, Mini, and Micro DC-DC converters, and in select cases V•I Chip based devices, to meet the transient immunity and EMI requirements of the standards referenced in the respective model datasheet. M-FIAM3HN1 works in conjunction with a specific set of Vicor converters to deliver optimal efficiency, power and protection. You can buy M-FIAM3HN1 from our website http://www.uscomponent.com.

V300A5C400BN

Posted on January 26, 2018 by uscomponent

V300A5C400BN is a full brick DC-DC converter module from Vicor. It is a member of maxi family, which provides high power density and low noise, with advanced power processing in a robust package. With Through Hole mounting system, its output voltage is 5V and output power is 400W. The length, width and height are 117.0 mm, 56.0 mm and 12.7 mm respectively. V300A5C400BN use advanced power processing, control and packaging technologies to provide the performance, ﬂexibility, reliability and cost-effectiveness of a mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. You can buy V300A5C400BN from our website http://www.uscomponent.com.

VI-J63-CW

Posted on January 16, 2018 by uscomponent

Vicor’s VI-J00 MiniMod family established a differnt standard in component-level DC-DC converters. VI-J63-CW is a half brick 24V 100W isolated DC/DC Converter from this family. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. Its operating temperature is -25°C ~ 100°C and the mounting type is through hole. It’s RoHS compliant (VE verisons). VI-J63-CW will provide you up to 90% efficiency. Using Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. Some of VI-J63-CW’s features: Low noise FM control, CE Marked, Remote sense and current limit, ZCS power architecture, Logic disable etc. You may buy VI-LJN1- CY from our website here http://www.uscomponent.com.

V24A24M400BL by USComponent.com – IGBT Distributor

Posted on January 9, 2018 by uscomponent

V24A24M400BL is a DC DC converter from Vicor’s maxi family. This DC-DC converter module uses advanced power processing, control and packaging technologies to provide the performance, flexibleness, reliableness and cost efficiencies of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high effectiveness. Its main applications are industrial and process control, distributed power, medical, ATE, communications, defense and aerospace. V24A24M400BL’s input voltage: 18 V (18 V – 36 V), output Voltage: 24 V and output Power: 400 W. Its operating temperature is -55°C ~ 100°C and the mounting type is through hole. The length, width and height are 116.80 mm, 55.9 mm and 15.7 mm respectively. It’s efficiency is 88.2%. The package is Full Brick. Some of V24A24M400BL’s features: low noise zero current switching and zero voltage, single-wire paralleling, logic enable / disable, input undervoltage lockout, utput overvoltage protection etc. You may buy V24A24M400BL from our website here http://www.uscomponent.com.

VI-264-EU-03-F2 by USComponent.com – IGBT Distributor

Posted on January 4, 2018 by uscomponent

VI-264-EU-03-F2 is a member of VI-200 family from Vicor. With more than 14 million units sold, VI-200 is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Functioning at frequencies up to 2MHz, VI-200 series converters offer outstanding power consistency, efficiency, noise performance, reliableness and usability. Booster modules (VI-Bxx) provide an easy, cost-efficient, ready-for-service solution for higher power output needs. One or more boosters may be utilized to create synchronous arrays able to provide several kilowatts of output power. VI-264-EU-03-F2’s input voltage: 300 V (200 V – 400 V), output Voltage: 48 V and output Power: 200 W. Its operating temperature is -10°C ~ 85°C and the mounting type is through hole. The length, width and height are 116.80 mm, 47.2 mm and 20.1 mm respectively. It’s efficiency is 88%. The package is Full Brick. Some of VI-264-EU-03-F2’s features: Remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture, low noise FM control, CE marked etc You may buy VI-264-EU-03-F2 from our website here http://www.uscomponent.com.

USComponent IGBTs

Just another Edublogs site

Tag Archives: Vicor Converter